Since Corkscrews are one of our most unique products in the air we decided to package them into 14" Gold Holographic Confetti Launcher Tubes filled with Triangular-shaped Tissue Corkscrew® Confetti.

Because of the unusual cut of the Corkscrews we decided to put caps at the ends of the gold holographic tubes so the Corkscrews won't fall out.  To use them, remove either cap, hold the tube high into the air and begin flicking the tube stopping at 12:00 high until all the Corkscrews are out of the tube.

With the  simple "Flick of the Wrist" while holding this disposable confetti cannon, triangular-shaped tissue Corkscrews will disperse into the air offering a  spinning and floating in a vertical spiraling motion, like whirly birds, as they slowly sail to the ground.

It is Very Important that you stop the tube while flicking it at 12:00 high because Corkscrews need as much height in the air as possible so they can spiral downward offering a beautiful effect.

Corkscrews  produce a truly remarkable special effect! Because we manufacture Corkscrews using Proprietary 

Manufacturing Specifications they are handmade in our factory in the USA.  Consequently, you can choose up to 8 tissue colors when you place your order.  Please be sure to indicate your color choices so we'll be sure to fill your Corkscrew Confetti Cannons with the correct colors.

Corkscrews are made from Eco-Friendly Biodegradable and Flame Proof Tissue.They are one of our most labor intensive products to make because of their unusual cut. But they offer one of our most Unique Special Effects!

WARNING: Do not point, flick, or fling toward anyone when using.

Disclaimer
 – Note some of the tissue our Corkscrews are made out of are colored with dye that may stain if they become damp or wet. Please remove wet Corkscrews immediately upon discharge.

© 2023 Parti Line International, LLC. All Rights Reserved

Step 1 – Remove the plastic cap from one end of the tube.

Step 2 – Hold the closed end of the Corkscrew tube firmly in one hand and extend your arm straight up above your head to the 12 o’clock position.

Step 3 – Bring your forearm back to the 3 o’clock position. In one continuous motion quickly return your arm to the 12 o’clock position while flicking your wrist. Repeat until the entire product is out of the tube. If nothing happens, flick harder. Remember to keep your elbow straight in the air so the Corkscrews gain plenty of height as they spiral downward!

(NOTE – If you flick the tube accidentally forward, you will be disappointed with the effect because the Corkscrews will fly out of the tube forward falling to the ground instead of spiraling downward like whirly birds into the air. So, it’s important that you keep  flicking the tube straight up into the air, stopping at 12:00 high.)

WARNING – Do not point, flick or fling this tube toward anyone when using.