Step into the realm of unforgettable moments with our one-of-a-kind battery-operated tabletop confetti cannon – the pinnacle of innovation in the industry!

Dazzle your guests with an affordable rental option that brings magic at your fingertips. Choose between our sleek push-button control unit or the convenience of a wireless transmitter, featuring a unique numeric code for flawless execution every time. Create mesmerizing displays as you synchronize multiple cannons effortlessly or stagger their firing for a truly awe-inspiring effect!

Unlock a world of possibilities as you integrate these stunning tabletop cannons into your event decor. From weddings to bar or bat mitzvahs, and even stage productions, let your imagination run wild as you craft visual masterpieces that leave a lasting impression. Picture the excitement as guests uncover hidden surprises, ready to explode with joy at just the push of a button!

Standing at 14 inches tall with a compact 4.5-inch base, our tabletop confetti cannon is designed for ease of use and maximum impact. Loaded with genuine Flutter FETTI products, it promises an experience like no other. Whether it's tissue or metallic FETTI, 6" strips, or 12" breakaways, the possibilities for spectacle are endless!

Each rental unit comes complete with everything you need for a seamless setup:

- Pedestal stand
- Pre-loaded launcher barrel
- Receiver
- 8-gram threaded Co2 cylinder
- Your choice of push-button control unit or wireless transmitter

For inquiries or quotes reach out to us toll-free at 877-321-1999
or email orlando@partiline.com. Our team is here to ensure your event shines brighter than ever before!

Proudly crafted in the USA, our Tabletop Cannon guarantees top-tier performance that exceeds expectations.

Look for the Flutter FETTI® Official Product Seal to ensure authenticity – accept no imitations!

Disclaimer: While our metallic Film products are stain-free, certain tissue confetti variants may contain dyes that could stain if damp or wet. Please remove any wet confetti promptly after discharge to avoid bleeding.

© 2024 Parti Line International, LLC. All Rights Reserved

INSTRUCTIONS FOR USE
PUSH BUTTON CONTROL UNIT

STEP 1- This system comes with 3 parts; the launcher base and valve, the power pack and a push button detonator. On the top of the power pack there are 2 outlets for connectors. One is for the wire coming from the launcher and the other accommodates the push button detonator. When attaching these, be careful to get the right connector in the right outlet. One connector has 2 pins and the other one has 3 pins. Check the pins on each wire and line them up to the right connector. When the correct pins are identified, place the connector on the top of the corresponding outlet and gently twist the connector back and fourth until it lines up with a keyway (a keyway is a tongue and grove). Once lined up o the keyway you can push down for a firm connection and twist the outer locking ring on the connecting wire. Repeat for both the launcher and push button connectors. (PLEASE WATCH THE INSTRUCTIONAL VIDEO FOR ADDITIONAL INFORMATION.)

STEP 2 - In preparation for firing, attach the barrel to the correct port on the launcher by pulling the spring load outer ring on the launcher port downward. Insert the barrel into the port firmly. Let the spring loaded ring pop up to lock the barrel in place. Pull the barrel upward to make sure it is locked into place.

STEP 3 - Screw the 8 gram threaded Co2 cylinder into the other launcher port. You will feel resistance as you screw down but keep screwing the Co2 cylinder in quickly. As the Co2 cylinder is pierced a small amount of gas will escape. Keep screwing down until all the gas stops leaking. That small amount of escaping gas will not effect the shot. You should feel a slight temperature drop when fully screwed down.

Next push the button on the front of the black power pack, hoLD for 2 seconds then release. The LED light in the front of the box should now blink red or green, the color makes no difference.

STEP 4 - When ready to fire, push the RED BUTTON on top of the detonator and the launcher barrel will fire instantaneously.

INSTRUCTIONS FOR USE
when using the WIRELESS SYSTEM 

STEP 1 - In preparation for firing, attach the launcher barrel to the correct launcher port on the side of the base by pulling the spring loaded outer ring downward. Insert the barrel into the port firmly. Let the spring loaded ring pop up to lock the barrel in place. Pull the barrel upward to make sure it is locked in place. (PLEASE WATCH THE INSTRUCTIONAL VIDEO FOR ADDITIONAL INFORMATION.) 

STEP 2- Screw the 8 gram threaded Co2 cylinder into the other launcher port. You will start to feel resistance as you screw down. Keep screwing quickly. As the Co2 cylinder is pierced a small amount of gas will escape. Keep screwing down until all the gas stops leaking. That small amount of gas escaping will not effect the shot. You should feel a slight temperature drop when fully screwed down.

STEP 3 - The following step should be performed 5 TO 10 MINUTES BEFORE THE LAUNCH QUE.

Push the button on the front of the black receiver until the LED light starts to blink either a red or green light. The color makes no difference. Turn on the transmitter by pushing the LARGE RED BUTTON on the LEFT SIDE. In the screen of the transmitter you will be asked for a code. ENTER CODE 7,9,2.

STEP 4 - To arm, press the W BUTTON, the read out in the transmitter window will say 1 arm or 2 disarm. Press 1 for arm, then all the receiver lights should be on steady. If all the receiver lights are not burning steady, push the CANCEL button and try again.

STEP 5 - When ready to fire, press G, then 1 then send. When you release the send button the launchers should all start firing in the sequence you requested. Firing is instantaneous, unless you asked for delayed programming. Sequencing or delay firing is preprogramed at the factory per your request.

ASSISTANCE - PLEASE CONTACT OUR TECHIE AT 504-251-6312. If no answer leave a message and he’ll call you back. We suggest ONCE THE TABLE TOP ARRIVES YOU CALL OUR TECHIE to do a complete run through BEFORE the day of your event.

RELOADS REQUIRED FOR THE SMALL TABLETOP REMOTE CONTROL CONFETTI CANNON

• Metallic Flutter FETTI or Metallic FETTI Strips
• Tissue Flutter FETTI
• Tissue Corkscrews
• Compression Tape
• 8-Gram Threaded Co2 cylinder
• 7/8" Compression Cap