About the Product
Available for Rent or Purchase
- Rental price $35.00 per week. (Confetti Products Sold Separately)
NOTE- If you rent the Quarter Turn launcher and want to purchase it we will apply the Rental Price you've already paid us to the Purchase Price. A nice deal!
Our Quarter Turn Hand Confetti Launcher is 21" long X 1" wide. Simplicity makes this CO2 confetti launcher easy to use. All of our confetti launchers come with instructions for use. Plus as you can see on this web page we are showing you a video of how to load and shoot this launcher.
Our Metallic confetti flame proof streamer products will shoot 40' into the air, and our Tissue flame proof and biodegradable streamer products will shoot 30' into the air. You can either use 2-9" Speed Load tubes in this CO2 confetti gun launcher or 1-18" Speed load tube. We recommend caping and taping the launcher barrel before shooting it, because the cap builds pressure inside the barrel making the products shoot higher into the air. You can also shoot our other types of Speed load product in this launcher like our Flutter FETTI confetti and our Corkscrews which are like whirly birds which spiral downward when you shoot them straight up into the air.
This Quarter Turn launcher is made in our Factory in Largo, Florida USA. It uses our U.S. Patented #7,666,056 Piercing Unit which holds the Co2 for many days once you've pierced the Co2 Cylinder.
If the box this launcher arrives in doesn't have the Flutter FETTI Official Product Seal on the outside of the box it's nOT AND AUTHENTIC CERTIFIED FLUTTER FETTI product.
ALL HAND CONFETTI SHOOTER ORDERS RECEIVED AFTER 3:00 P.M. CENTRAL STANDARD TIME WILL BE PROCESSED ON THE NEXT BUSINESS DAY.
CONFETTI ACCESSORIES REQUIRE FOR USE:
- 1-18' Speed load tube of confetti or 2-9" Speed load tubes of confetti
- 1" Compression Cap
- Compression Tape
- 12 Gram threaded Co2 cylinder
NOTE - If you are using our products by the Gross to fill the Quarter Turn launcher, the paper tab will be on each streamer keeping the streamer closed in the bag. YOU MUST BREAK THE TAB before loading the Streamers by the gross into your launcher barrel, or it will not unroll in the air.
Caution: Do not fire our launchers loaded with Metallic streamers outside over telephone wires, for our PVC streamers conduct electricity. If our streamers land on 2 power lines, you run the risk that they may short out the nearest fuse or transformer. If you want to shoot streamers outside, please use our 2" X 40' Tissue Streamers or our 18" speed load tubes of tissue streamers, both of which are flame retardant.
All prices are in USD Copyright 2022 Flutter FETTI Confetti & Streamers.
Disclaimer: Note some confetti products are colored with dye that may stain if they come become damp or wet. Please remove wet confetti immediately upon discharge.
Instructions For Use
LOADING THE LAUNCHER BARREL
If you are shooting Tissue or Metallic Flutter FETTI® then we recommend you first insert one of our 1" Lifting Foam into the bottom of the barrel. The foam will help the confetti fly higher into the air.
If you are shooting Tissue or Metallic streamers in the launcher we DO NOT recommend you using 1" lifting foam in the bottom of the barrel.
Remove the cap from the 9" or 18" speed load tube of Flutter FETTI® products. Or if you're using larger streamers or streamers by the gross BE SURE to remove the tape from each streamer BEFORE you put them into the launcher barrel. Then insert the contents (confetti or streamer products) into the barrel of the launcher. The launcher should be filled to within two inches of the top.
Place a 1" cardboard compression cap over the mouth of the launcher barrel.
Using the launcher tape, take a 5" - 6" strip and tape around the outside diameter, being careful to tape smoothly so there are no air bubbles. DO NOT tape across the top of the cap.
FIRING THE LAUNCHER
Be sure the lever on the trigger (located on the bottom of the barrel) is perpendicular to the barrel. Screw on 1 - 12 gram threaded Co2 cylinder into the aluminum-piercing unit at the bottom of the launcher barrel. (Note, we received a U.S. Patent #10,222,169 for our piercing unit because it won't leak.) You may hear gas releasing as you screw in the Co2. If you do, continue screwing rapidly until it is tightly screwed in and no Co2 is being released. If it is not screwed in tightly the launcher WILL NOT WORK
Point the launcher up and at a slight angle. (If you are firing CORKSCREWS aim the launcher straight up into the air to get the correct spiraling effect as it flutters and floats into the air.) Quickly pull the lever down to the parallel position with one swift motion. The confetti will discharge out of the launcher into a wonderful display of color and fun!
PLEASE NOTE - The Co2 cylinder will ice over upon discharge. Wait a few seconds until it is warm enough to unscrew and discard.
Accessories to use with the Quarter Turn Launcher
- Tissue or Metallic Speed load tubes of Flutter FETTI or Streamers or
- Larger Tissue or Metallic Streamers.
- 1 -12 gram threaded Co2 cylinder
- 1- 1" Compression Cap
- 1 - 1" Lifting Foam (If needed)
- Paper Tape
CAUTION: Do not fire our Co2 confetti launchers loaded with Metallic Streamers or Metallic FETTI outside over telephone wires, for our PVC will conduct electricity. If our streamers or confetti land on 2 power lines, you run the risk that they may short out the nearest fuse or transformer. If you want to shoot confetti or streamers outside please use our tissue streamers or our tissue Flutter FETTI both are flame proof.
WARNING: Do not aim or point the launcher barrel toward anyone when using.
For technical assistance contact Jon Stern 24/7
RETURNING THE LAUNCHER
If you have rented the Quarter Turn Confetti Launcher, please carefully put them back into the shipping box and ship them back to the address below. If you paid for round trip shipping please contact us to contact FEDEX to pick up the shipping box.
9310 Ulmerton Road
Building 2 Suite #300
Largo, FL 33771
(504) 522-0300 Fax (504-522-0304
TOLL FREE 877-321-1999