MASTER BLASTER "HANDHELD" Co2 CONFETTI LAUNCHER

42" LONG BARREL WITH A TRIGGER UNIT

MADE IN THE USA

- Rental Price $84.00

- Price $225.00 

- Co2 Confetti Launcher Products for Accessories

A VERSATILE CONFETTI LAUNCHER - THE BEST HANDHAND LAUNCHER IN THE INDUSTRY

If you need a powerful handheld confetti blaster that can easily be repositioned, the Master Blaster Co2 Confetti Launcher is exactly what you’re looking for. Measuring at just 42”, the setup requires only the blaster launcher barrel, confetti or streamer products, a compression cap, compression tape and a 16-gram Co2 cylinder. Launch confetti, reload, and repeat - easy as that!

Please watch the video above to see the Master Blaster in action!

Plus watch the Instructions for Use video to see how to load and shoot the launcher.

Versatile Power

The master of all ceremonies – our Master Blaster Co2 Confetti Launcher is totally versatile as it’s a hand-held launcher that can be positioned anywhere you need it during your event! One of the Master Blaster’s biggest strengths is how quickly and easily it can be moved to another location last-minute. This gives you the freedom to use our confetti blaster as you like, letting you adjust on the fly so that you’ll be able to successfully launch your confetti or streamer products even when last minute problems arise (like wind direction). The Master Blaster is very lightweight and easy to carry, which means just about anyone can carry it.

The trigger unit on our Master Blaster has one of our U.S. patented #10,222,169 B2 new piercing units which allows greater strength to blow our products further, plus it allows you to screw in the Co2 cylinder many hours before use without leaking. Plus this same trigger unit can be used with our Mega Blaster Launcher which has a 2" barrel allowing you to use the wide variety of Flutter FETTI products at your events.

The Master Blaster Launcher can use a wide variety of our 2 - 18" Speed load tubes of Flutter FETTI products or it can use our larger streamer products like our 2" X 40' long Metallic or Tissue Streamers which can shoot the streamers 85'-90' high into the air. We recommend this launcher for outdoor events since the wind is always your enemy when shooting confetti or streamers outside. This launcher provides our clients to quickly move their position at outdoor events depending on the environmental adjustments which might need to be quickly made. Our Master Blaster Launcher is handmade in our factory in the USA.

You can rent or purchase our Master Blaster Launcher. If you rent it and love it we'll apply the rental price to the purchase price. Just let us know.

Accessories Needed:

- 1 or 2 (2” X 10”) sleeves of Flutter FETTI products - Confetti or Streamer products

- 1 bag of 1 1/4"Compression Caps (20 caps per bag.)

- 1 Bag of Lifting Foam (20 pieces of lifting foam per bag.)

- 1 roll of Compression Tape

- 1 -16 Gram threaded Co2 Cylinder per shot

ALL ORDERS RECEIVED AFTER 3:00 P.M. Eastern Time (ET) WILL BE PROCESSED ON THE NEXT BUSINESS DAY.

Remember to check your shipping box when it arrives for the "CERTIFIED FLUTTER FETTI® PRODUCT STICKER" on the outside of the box. To be sure it’s an authentic Flutter FETTI product.

Caution:
Do not fire our launchers loaded with Metallic streamers outside over telephone wires, for our PVC streamers conduct electricity. If our streamers land on 2 power lines, you run the risk that they may short out the nearest fuse or transformer. If you want to shoot streamers outside, please use our 2" X 40' Tissue Streamers or our 18" speed load tubSo Ses of tissue streamers, both of which are flame proof.

Products By the Gross:
If you are using our products by the Gross to fill the Quarter Turn launcher, the paper tab will be on each streamer keeping the streamer closed in the bag. YOU MUST BREAK THE TAB before loading the Streamers by the gross into your launcher barrel, or it will not unroll in the air.

All prices are in USD Copyright 2024 Flutter FETTI Confetti & Streamers.

LOADING THE CANNON BARREL:

Step 1 – Remove the caps from both ends of the speed load tubes.  (Note, use either 2-18” speed load tubes or 4-9” speed load tubes.) If you are loading our larger streamers BE SURE TO REMOVE THE PIECE OF TAPE ON EACH STREAMER BEFORE INSERTING IT INTO THE CANNON BARREL,

Step 2 – Insert the contents (confetti or streamers) of the speed load tubes into the barrel of the cannon. Do not put the plastic tube in the barrel, just the contents. 

Step 3 –Place the 1 1/4" cardboard compression cap over the mouth of the barrel. This cap will help build compression to make the products fly higher into the air.

Step 4 – Using the compression  tape, take a 5” – 6” strip and tape around the outside diameter (the skirt), being careful to tape smoothly so there are no air bubbles. DO NOT tape across the top of the cap.

SETTING UP THE TRIGGER UNIT:

Step 5 – Next pull up the Blue lever on the left side of the trigger unit to the horizontal position. This lever should be in the 9 o'clock position to close the valve. There is a safety slide on the lever.  Slide the lever towards you.   Make sure the blue lever is in the closed position, the 9 o’clock position.

Step 6  - Next Insert 1- 16 gram threaded Co2 cylinder into the aluminum piercing unit at the bottom of the cannon barrel and screw it in slowly until it tightens. Keep turning until it is totally tight. You may hear gas releasing as you screw in the Co2. If you do, continue screwing the cup until it is tightly screwed in and no Co2 is being released. The Co2 will feel cold once it is tightly screwed in.

Step 7 – Insert the barrel into the silver quick connect and push it down as far as it will go then lock the levers down. Note, you may have 2 levers to push down on the quick connection. If you do please lock them down. There are safety pins on each lever.  Please remove the pins and insert them into the holes of the 2 levers.  They will secure the cannon barrel to the trigger unit.  Now it is ready to fire.

FIRING THE CANNON:

Step 8 - On the Blue lever is a SILVER SAFETY LOCK sliding piece.  Move the safety lock to the left and hold it in place. That allows you to pull the trigger lever unit down when you're ready to fire. If you don't move the safety lock to the left you won't be able to pull the Blue lever unit down to fire the cannon.

Step 9 – Point the cannon up and at a slight angle. (If you are firing CORKSCREWS aim the cannon straight up into the air to get the correct spiraling effect). Quickly pull the lever down to the 6 o'clock position. The confetti or streamers will discharge out of the cannon into a wonderful display of color and fun! The Co2 cylinders will ice over upon discharge.

CAUTION – DO NOT AIM OR POINT THE CANNON BARRELS AT ANYONE.

RETURN INSTRUCTIONS:

NOTE – If you are RENTING one of our cannons and it arrived in a cardboard box please save the box you received it in to use for the return shipping.  Please remove all used and unused Co2 cylinders before you ship the cannon back to us.

If you have paid for round trip shipping for the rental of this cannon call us toll free at 877-321-1999 to arrange the pick up of the cannon.  Or there might be a return shipping label in your box. You can use it to ship the box back to us. If you break or lose any pieces of the cannon please let us know.

FOR TECHNICAL ASSISTANCE – CONTACT JON STERN 24/7 AT (504) 251-6312

OUR RETURN ADDRESS IS: FLUTTER FETTI® 9310 Ulmerton Rd Bldg 2 #300, Largo, Florida 33771 
(504) 522-0300 – Fax (504) 522-0304 – TOLL FREE 877-321-1999