Wireless Tabletop Cannon Rental Price $56.25 per wk./Shoots Confetti/FETTI Strips/Breakaways

Introducing the Only Battery-Operated Tabletop Confetti Cannon in the Industry!

Take your event to the next level with our exclusive, self-contained, battery-operated tabletop confetti cannon—the only one of its kind available anywhere!

Instantly Transform Any Celebration

From weddings, bar/bat mitzvahs, corporate events, and nightclubs to stage productions and special reveals, this compact yet powerful cannon delivers high-impact excitement with just the push of a button!

They are in a flower arrangement or a stage effect.

Completely Self-Contained Power – No external power sources needed!

Uses 1 - 8-Gram Threaded CO₂ Cylinder – Designed for consistent, reliable bursts of confetti.

Wireless or Push-Button Control – Choose a manual trigger or a numeric-coded remote transmitter for perfectly timed effects!

Sync Multiple Cannons – Fire simultaneously for a massive burst, or stagger launches for a dynamic, choreographed display!

Designed for Maximum Impact & Ease of Use

Standing 14 inches tall with a compact 4.5-inch base, this confetti cannon is built for discreet placement yet powerful results. Each unit is pre-loaded with the recommended products in "Custom Colors" to match your party's motif.

Customization Options

Choose from a variety of Flutter FETTI® products, including:

- 9" Speed load tubes filled w/Biodegradable and Flameproof Tissue Confetti or Shimmering Flameproof Metallic FETTI®

- 9" Speed load tubes filled 6”long FETTI® Strips which curl up like twinkling stars

- 9" Speed load tubes filled 12” long Tissue and Metallic Breakaways for dramatic cascades

- Each product above is available in Custom Color Options to match your event’s theme

What's Included in Each Rental Package?

Pedestal Stand for stability
Pre-Loaded Launcher Barrel in your choice of products.
Receiver for seamless operation

8-Gram Threaded CO₂ Cylinder – powerful yet compact
Choice of Control Unit– Push-Button Unit or Wireless Transmitter

Proudly Made in the USA – Expect top-tier performance and reliability!

Ensure authenticity: Look for our Certified “Official Flutter FETTI” sticker on the outside of the box your Table Top Cannons will arrive in . Accept no imitations!

Important Notice: Orders received after 3:00 p.m. Central Standard Time will be processed on the next business day.

While our tissue and metallic is safe under normal conditions, when saturated with liquid and under pressure, our tissue and metallic confetti or streamers may bleed color. For best results, please remove any wet confetti or streamers immediately.

© 2025 Parti Line International, LLC. All Rights Reserved

Make your next event truly unforgettable—contact us today!

(Using a wireless transmitter to shoot off the products)

The remotely detonated tabletop cannon you'll need these 5 parts:

1.     The cannon base

2.     A 9” barrel which holds the confetti or streamer products

3.     8 gram threaded CO2 cartridge

4.     Receiver (small black box)

5. Transmitter 

Set Up

The cannon base is connected to the receiver via a “dongle” (black wire”) coming out of the cannon base. This wire has a 2-pin connector inside of it.

Insert the wire from the cannon base into the 2-pin connection on top of the small black receiver box. There are 2 ports on top of the receiver. One is a 2 - pin and the other is a 3 - pin. Be careful to insert the wire from the cannon base into the 2 -pin port.  Gently turn the connector in the port until the connector seats firmly down on the receiver. There is an outer ring on the black wire connector, once seated, turn the ring until it locks in place.

Note - When ready to fire, screw the 8 gram threaded CO2 cartridge into the brass port on the side of the cannon base.   Screw in gently until you feel resistance, this means the cartridge is up against the piecing pin. Now continue to screw in the cartridge firmly and quickly until the hissing stops. We recommend you screw in the CO2 as close to the time you're going to fire these off as possible.

Now attach the black barrel to the cannon base.   The bottom of the barrel has a brass connector that fits into a brass connector on the cannon base. The connector on the cannon base has a brass colored ring, pull the ring down, insert the barrel and let the ring pop back up into a locked position. Now pull on the barrel to make sure it’s tightly locked on the 

Cannon Connector.

To Fire

Turn the receiver on by pressing and holding the button on top of the receiver. This button is between the 2 ports on top. While holding that button down, press the small button on the front of the receiver, releasing both buttons. If activated correctly, the led on the front of the receiver should start to blink. The receiver is now activated.

THE TRANSMITTER

Turn the transmitter on by pressing the large red button on the left side of the transmitter. It will ask for a pin code. The code is 792. When entered, the transmitter will say code accepted and the screen changes to “enter RAU #”.  To fire, press and release the “W” button, the screen will say, arm 1, disarm 2. Press 1. This will do a couple of things, arm the transmitter and activate the receiver. The LED on the receiver should now burn steady. The system is now armed and ready. We suggest you do this a couple of minutes prior to the firing cue.

NOTES ON THE TRANSMITTER 

ONCE YOU RECEIVE IT CALL JON – 504-251-6312 – DO NOT TOUCH ANYTHING ON THE TRANSMITTER UNTIL YOU SPEAK W/JON.  

HE HAS PRE-PROGRAMED THE TRANSMITTER FOR YOU.

The transmitter will come to you pre programmed the way you asked for it. If you have multiple launchers, either firing all at once and in a sequence, you would press “G” “1”, send. (G, 1, send). There is about 1 sec. delay before detonation, this allows the unlock code sent to the receiver before the fire command hits.

If you want to fire the cannons separately, you would simply enter the receiver number (found on the front of each receiver) and then send. Example; 25, send. You can fire several cannons manually this way. If you choose to fire manually, don’t forget to make note of the cannon  position (where you put them), so you can get the proper sequence.

IMPORTANT

Plug in the transmitter to charge as soon as you open the package. 

The transmitter needs an overnight charge.

The transmitter must be on to charge. If charging correctly, you will see a small asterisk on the upper right hand corner of the screen. The transmitter will operate while plugged in, so if you get a “low batt” signal, just plug the transmitter in and continue to use it.

You may also test the system without the barrel or the CO2. Just follow the above instructions and listen for a low “click” on the launcher base. The click is the valve opening on the cannon. We suggest that you practice a few times using this method.

We offer complimentary 24/7 technical services. 

Please call 504-251-6312 and ask for Jon. 

Thanks for renting the Table Top Cannons from us.