The Master Blaster Co2 Confetti Cannon is a versatile, powerful handheld confetti cannon ideal for any event requiring easy repositioning and quick deployment. Measuring 42" in length, the cannon’s lightweight design allows for effortless mobility, enabling adjustments on the fly, even during outdoor events where wind direction may shift. It requires minimal setup with a blaster barrel, confetti or streamer products, a compression cap, compression tape, and a 16-gram Co2 cylinder.

Featuring a patented piercing unit, this cannon delivers reliable strength to launch confetti and streamers up to 85'-90' high. The unit allows Co2 cylinders to be loaded well in advance without leakage. For added versatility, the same trigger can be used with the Mega Blaster Launcher, which has a larger barrel for various Flutter FETTI® products.

You can either rent or purchase the Master Blaster Cannon. If you rent it and decide to buy, the rental price will be applied toward the purchase.

Accessories Needed

• 1 or 2 (2" X 10") sleeves of Flutter FETTI products (confetti or streamers)
• 1 bag of 1 1/4" Compression Caps (20 caps per bag)
• 1 bag of Lifting Foam (20 pieces per bag)
• 1 roll of Compression Tape
• 1 - 16-gram threaded Co2 Cylinder per shot

Versatile Power: Perfect for outdoor events, the Master Blaster Cannon allows for quick repositioning in response to changing conditions, ensuring successful launches even with last-minute adjustments. It’s designed for easy handling, letting anyone operate it with confidence.

Important Notice: Orders placed after 3:00 PM Eastern Time (ET) will be processed the next business day.

Ensure Authenticity: Look for our Certified "Official Flutter FETTI®" sticker on the outside of the box your Master Blaster Cannon arrives in to verify it's an authentic Flutter FETTI® product.

Caution: Avoid firing launchers loaded with metallic streamers near overhead wires, as our PVC streamers conduct electricity. For outdoor use, please choose our 2" X 40' Tissue Streamers or 18" Speed Load Tubes of tissue streamers.

Disclaimer: While our tissue products are safe under normal conditions, some may bleed color if they become damp. Our Metallic and Neon PVC products do not bleed.

© 2024 Parti Line International, LLC. All Rights Reserved.

LOADING THE CANNON BARREL
Step 1 – If you received a piece of gray foam with your order, first insert it into the launcher barrel. Use any object to push it to the bottom of the barrel.
Step 2 – Remove the caps from both ends of the speed load tubes. Insert the contents (confetti or streamers) of the speed load tubes into the barrel of the cannon. Do not put the plastic tube in the barrel, just the contents. If you are loading our Stadium Streamers BE SURE TO REMOVE THE PIECE OF TAPE ON EACH STREAMER BEFORE YOU INSERT IT INTO THE CANNON BARREL.
Step 3 – Place the cardboard compression cap over the mouth of the barrel. This cap will help build compression to make the products fly higher into the air. Using the cannon compression tape, wrap the tape around the cap one and a quarter times, ensuring it is applied smoothly without air bubbles. DO NOT tape across the top of the cap.

THE TRIGGER UNIT
Step 4 – Insert the threaded Co2 cylinder into the aluminum piercing unit at the bottom of the barrel and screw it in clockwise slowly until it tightens. Continue turning until it is totally tight. You may hear gas releasing as you screw in the Co2. If so, continue screwing the Co2 until no gas is being released. The Co2 cylinder will feel cold once it is tightly screwed in.
Step 5 – Insert the barrel into the silver quick connect and push it down as far as it will go. (Note, if you're using our Quarter Turn Cannon the trigger unit is already connected to the barrel.) If there are 2 levers on the quick connect, lock then both down. The cannon is now ready to fire.

FIRING THE CANNON
Step 6 – Hold the trigger unit upright. Pull up the Blue lever on the left side of the trigger unit to the horizontal position. There is a safety slide on the blue lever, side it toward the blue lever to unlock it. Make sure the blue lever is in the closed position, (a 9 o’clock position). If the safety lock is not moved to the left, you will not be able to pull the Blue lever unit down to fire the cannon.
Step 7 – Point the cannon up and at a slight angle. (If firing CORKSCREWS aim the cannon straight up to achieve the correct spiraling effect). Quickly pull the blue lever down to a parallel position. The confetti or streamers will discharge out of the cannon into a wonderful display of color and fun! The Co2 cylinders will ice over upon discharge.

CAUTION – DO NOT AIM OR POINT THE CANNON BARRELS AT ANYONE.

NOTE – If you are RENTING one of our cannons and it arrived in a cardboard box, save the box for the return shipping.  Remove all used and unused Co2 cylinders before shipping the cannon back to us.  

If you have paid for round trip shipping for the rental, call us toll free at 877-321-1999 to arrange the pick up of the cannon.  There might be a return shipping label in your box; You can use it to ship the box back to us. If you break or lose any pieces of the cannon, please let us know.